
Your courses
Click Apply nowabove and continue to stage 2 where you can review and choose your 1st choice course to apply for.

Carpentry and Joinery Apprenticeship
Start Date: 1st September 2025
Other start dates:
16th September 2024

- Length 2 Years
- Study Apprenticeship (One day a week studying)
- Location Construction and Automotive Green Technology Centre
More about the course
Do you see yourself fitting into a construction site as a Site Carpenter or in a workshop as an Architectural Joiner? Perhaps you see a future being a sole trader and running your own business? If so, our Carpentry and Joinery Apprenticeship is perfect for you!
If you want to specialise in a particular area of construction, for example, heritage restoration, there's even an option for that!
Choose from a Carpentry or Joinery pathway and earn whilst you learn as you develop the skills you need to work in the trade.
A minimum of 20% of your contracted hours must be spent in off-the-job training. This is predominantly done one day per week at college but can also include training sessions.
Entry requirements:
- GCSE at grade 3 (D) or above, or equivalent in maths and English
What will I achieve?
Upon successful completion of this apprenticeship, you will achieve a Level 2 Carpentry and Joinery qualification.
What will I learn?
This is a core and options apprenticeship with two pathways
- Pathway 1: A Site Carpenter will normally work on a construction site, or in domestic and commercial premises, preparing and fixing building components, from the initial erection of a new building through to the installation of all necessary fixtures and fittings, as well as a range of repair and maintenance activities.
- Pathway 2: An Architectural Joiner will normally be employed in a workshop producing timber-based building components and other architectural products, such as doors, windows, units, and staircases, which are then transported to construction sites to be installed by site carpenters.
How is the course taught?
- College day release (term time only)
- On-the-job training
- Assessment
- Portfolio
You must meet the requirements of an end-point assessment in order to be deemed competent in your job role.
How am I assessed?
Once you have completed all elements of your apprenticeship, you will enter the gateway and get ready to take your end-point assessment. The end-point assessment consists of a Knowledge Assessment (short written test), a Practical Skills Assessment (skills test) and an interview underpinned by a portfolio of evidence.
Where can I progress?
On completion of this standard, you may progress onto the Advanced Apprenticeship Standard in Carpentry and Joinery or secure employment as a Site Carpenter or Architectural Joiner.
The achievement of this standard will meet the requirements of the Construction Skills Certification Scheme (CSCS) ‘Skilled Worker’ standard which is widely accepted in the sector as a ‘licence to operate’ in a skilled construction trade.
Apprenticeship pay:
You will be employed as a regular employee on a contract of employment for at least 30 hours per week and paid at least the National Minimum Wage for an Apprentice, currently £5.28 per hour. Employers can pay the National Minimum Wage for an Apprentice for the first year of the apprenticeship. After this first year, the salary rate will change to the National Minimum Wage for your age.
Get in Touch
Meet our tutors and students
Adam Griffin
Green Technology Centre ManagerAs a dedicated Site Manager, I oversee the centre's daily operations and support learners in their journey toward achieving their qualifications. My responsibilities include managing four departments: Motor Vehicle, Vehicle Respraying, Bricklaying, and Property Maintenance Operations, offering qualifications ranging from Level 1 to Level 3, as well as apprenticeship programs in these areas. With a background as a fully qualified motor mechanic and vehicle respraying tutor for eight years, I bring hands-on expertise to my role in management.
Carpentry
Gallery

What can I do with a qualification in Carpentry and Joinery?
Daily tasks:
- Visits and advises clients on the use and servicing of electrical and electronic systems and equipment.
- Diagnoses and detects faults and implements procedures to maintain efficient operation of systems and equipment.
- Plans installation methods, checks completed installation for safety and controls or undertakes the initial running of the new electrical or electronic equipment or system.
- Sets up equipment, undertakes tests, takes readings, performs calculations and records and interprets data.
- Plans and prepares work and test schedules based on specifications and drawings.
Powered by EMSI
Daily tasks:
- Levels, aligns and embeds stone in mortar and faces brick, concrete or steel frame with stone to make and repair structures.
- Uses hand and power tools to shape, trim, carve, cut letters in and polish stone.
- Spreads mortar on foundations and bricks, and places, levels and aligns bricks in mortar bed.
- Marks and cuts stone using hammers, mallet and hand or pneumatic chisels.
- Examines drawings, photographs and specifications to determine job requirements.
Powered by EMSI
Daily tasks:
- Maintains and repairs woodwork and fittings.
- Checks accuracy of work with square, rule and spirit level.
- Aligns and fixes prepared wood pieces by screwing, nailing, gluing and dowelling to form frames, shop fronts, counter units, decking, theatrical sets, furniture, small wooden craft, scale models and wooden templates.
- Selects and measures appropriate wood and cuts, shapes and drills to specification using saws, planes, chisels and other power or hand tools.
- Examines drawings and specifications to determine job requirements.
Powered by EMSI
Daily tasks:
- Stains, waxes and french polishes wood surfaces by hand.
- Mixes adhesive or removes self-adhesive backing and positions covering material on wall, matching up patterns where appropriate and removing wrinkles and air bubbles by hand or brush.
- Applies primer, undercoat and finishing coat(s) using brush, roller, or spray equipment.
- Prepares surfaces by cleaning, sanding and filling cracks and holes with appropriate filler.
- Erects working platform or scaffolding up to five metres in height.
Powered by EMSI
Daily tasks:
- Checks fire and safety equipment for adequate functioning.
- Undertakes minor repairs and notifies owner of need for major repairs.
- Controls heating, lighting and security systems.
- Supervises and/or undertakes the cleaning and maintenance of premises.
- Locks and unlocks doors and entrances at appropriate times.
Powered by EMSI
What can I do with a qualification in Carpentry and Joinery?
Electrical and Electronics Technicians
Daily tasks:
- Visits and advises clients on the use and servicing of electrical and electronic systems and equipment.
- Diagnoses and detects faults and implements procedures to maintain efficient operation of systems and equipment.
- Plans installation methods, checks completed installation for safety and controls or undertakes the initial running of the new electrical or electronic equipment or system.
- Sets up equipment, undertakes tests, takes readings, performs calculations and records and interprets data.
- Plans and prepares work and test schedules based on specifications and drawings.
Powered by EMSI
Bricklayers and Masons
Daily tasks:
- Levels, aligns and embeds stone in mortar and faces brick, concrete or steel frame with stone to make and repair structures.
- Uses hand and power tools to shape, trim, carve, cut letters in and polish stone.
- Spreads mortar on foundations and bricks, and places, levels and aligns bricks in mortar bed.
- Marks and cuts stone using hammers, mallet and hand or pneumatic chisels.
- Examines drawings, photographs and specifications to determine job requirements.
Powered by EMSI
Carpenters and Joiners
Daily tasks:
- Maintains and repairs woodwork and fittings.
- Checks accuracy of work with square, rule and spirit level.
- Aligns and fixes prepared wood pieces by screwing, nailing, gluing and dowelling to form frames, shop fronts, counter units, decking, theatrical sets, furniture, small wooden craft, scale models and wooden templates.
- Selects and measures appropriate wood and cuts, shapes and drills to specification using saws, planes, chisels and other power or hand tools.
- Examines drawings and specifications to determine job requirements.
Powered by EMSI
Painters and Decorators
Daily tasks:
- Stains, waxes and french polishes wood surfaces by hand.
- Mixes adhesive or removes self-adhesive backing and positions covering material on wall, matching up patterns where appropriate and removing wrinkles and air bubbles by hand or brush.
- Applies primer, undercoat and finishing coat(s) using brush, roller, or spray equipment.
- Prepares surfaces by cleaning, sanding and filling cracks and holes with appropriate filler.
- Erects working platform or scaffolding up to five metres in height.
Powered by EMSI
Caretakers
Daily tasks:
- Checks fire and safety equipment for adequate functioning.
- Undertakes minor repairs and notifies owner of need for major repairs.
- Controls heating, lighting and security systems.
- Supervises and/or undertakes the cleaning and maintenance of premises.
- Locks and unlocks doors and entrances at appropriate times.
Powered by EMSI
Good to know
What's happening?
Events
Course Added
This course has now been added to your basket. Please click below to apply now or contine browsing.
Apply Now